Brief Introduction of the GETR-48 series Real Time PCR
The Gentier real-time PCR system is mainly consisted of control system, power system, temperature control system, detection system, man-machine interface system and instrument shell, etc.
Among them, the temperature control system includes Peltier heating module, sample block and hot lid, etc; the detection system includes LED excitation light source, photodiodes and light filter, etc; the man-machine interface system includes data acquisition and analysis software, which is mainly responsible for real-time data collection, fluorescence diagram formation, data processing and diagram analysis, in order to quantify or characterize the target nucleic acid and obtain other test report information, etc.
Features of the GETR-48 series Real Time PCR
Design for flexible use
Standard with 10.4' or 7’’ LCD touch screen, functions quickly accessible through simple, one-touch commands
Wizard operation to lock and unlock the transport locker.
Message alarm indicate the status of the machine
USB port update software and firmware
Unique power-off protection function can save all the setted configurations for sudden power outages, and allow the experiment continues when power supply is restored.
Fast and uniform heating System
Concealed lid with constant temperature and isopiestic pressure
Electrical controlled elevating & automatic locked platform
Thermo block is based on improved heat pipe technology, leading to extraordinary Iintra-well temperature homogeneity and maximized inter-well, inter-cycle reproducibility.
Highly efficient PID&DSP control algorithm ensures faster respond and stronger interference resistance, fast and uniform heating and heat sinking
High sensitive optical system
High-sensitivity and wide dynamic range of fluorescence detection system, sample dynamic range could be from 101 to 1010 copies
Fast and precise mechanical scanning structure ensures the illumination uniformity of 96 wells, Eliminate edge effects, no need for ROX calibration
Fluorescence excitation by a high-intensity and long-life LED, Bulb Luminance will not attenuation over time, free maintenance optical system through the entire life
Professional designed fluorescence filters realize the highly fluorescence transmittance and meanwhile minimize the fluorescence channel crosstalk.
Easy-to-use Software
Friendly interface and clearly functional modules design, first-time users can easily start a new experiment.
All experiment data and setting options are shown conveniently on a single interface.
Instrument Management allow you managing all the Gentiers in the WLAN
More than thousands results can be stored in device
USB or WLAN easily transfer experimments data anywhere you needed
| GETR 48E | GETR 48S | GETR 48R | |
| Thermal Block | |||
| Sample capacity(wells) | 48 | ||
| Reaction Volume | 5-100 μL | ||
| Consumables | 0.2ml 8-strip tubes ,0.2ml PCR single tube(Optical flat cap,clear tube) | ||
| Temperature range | 0°C-100°C | ||
| Heating/cooling method | Peltier | ||
| Max heating rate | 8.0°C/sec | ||
| Average heating rate | 6.0°C/sec | ||
| Max cooling rate | 5.5°C/sec | ||
| Average cooling rate | 4.0°C/sec | ||
| Temperature accuracy | ±0.1℃ | ||
| Temperature uniformity | ±0.1℃ | ||
| Gradient Range | 1°C-40°C | N/A | 1°C-40°C |
| Gradient block | 8 row | 8 row | |
| Special temperature portocol | Gradient PCR,Long PCR,Touch Down PCR | Long PCR,Touch Down PCR | Gradient PCR,Long PCR,Touch Down PCR |
| Heat Lid | |||
| Temperature range | Room Temperature–110°C | ||
| Optical System | |||
| Excitation Source | 4LEDs | 2LEDs | |
| Detector | Photodiode | ||
| Detection Position | Excitation and scan from lateral | ||
| Detection method | 4 channels scanning at the same time, no edge effect. | ||
| Detection time | 2 seconds for 48 wells for all channels | ||
| Range of excitation/ emission wavelengths (nm) | 1 465 /510 (FAM,SYBR Green I，SYTO9，EvaGreen，LC Green) 2 527/ 563 (HEX,VIC,TET,JOE) 3 580 /616 (ROX,Texas Red) 4 632/ 664( Cy5) | 1 465 /510 (FAM,SYBR Green I，SYTO9，EvaGreen，LC Green) 2 527/ 563 (HEX,VIC,TET,JOE) | |
| Probe | Taqman Probe,Molecular beacons probe，Scorpion probe | ||
| Multiplexing | Up to 4 targets | Up to 2 targets | |
| Fluorescence Linearity | r≥0.990 | ||
| Fluorescence Dynamic Range | Adjustable | ||
| Performance | |||
| Sample Linearity | /r/≥0.999 | ||
| Sample repeatability | Ct value CV≤0.5% | ||
| Sample Dynamic Range | 1-1010 copies | ||
| Software Funtions | |||
| Data Analysis modes | Qualitative analysis,Absolute quantification, Relative quantification,Genotyping analysis,Endpoint analysis， Melt curve analysis, High Resolution Melting | ||
| Control modes | 1.7 touch screen 2. PC direct control 3. WLAN control(One PC can control max 10 units, and device can be controled by any PC in the WLAN) | ||
| Data Stroage | Upload and download through USB disk,1000 results can be stored in machine | ||
| Power failure protection | Automaticly start running experiments after power supply, no need wait PC software | ||
| Customize Report | Templetes reserved ,report can customized | ||
| Administration Management | Administrator can set funtions limts for users | ||
| Fault Management | Fault report and analysis, solution instruction | ||
| LIS connection | CSV,Excel,TXT format data output,open port for LIS connection | ||
| Others | |||
| PC operating system | Win 7, Win 10 | ||
| Communication Port | 1 ethernet and 2 USB | ||
| Footprint(WxDxH) | 260mm X 400mm X 2605mm | ||
| Weight | 11kg | ||
| Power usage | AC 100 to 125 V / 200 to 240 V (50/60 Hz). | ||
| power consumption | 600VA | ||
| Work environment | Tempereture:10°C~30°C Humidity:20%~85% | ||